|
|
 |
Biometra MP20/System II型真空隔膜泵
Biometra Membrane Vacuum Pump MP20/System II
|
|
 |
 |
MP20/System II型真空隔膜泵(Membrane Vacuum Pump MP20/System II)
|
| |
Vacuum pump for laboratory use |
 |
- End vacuum 8 mbar
- Max. delivery 20 l/min
- High vapor and condensate tolerance
|
| All membrane vacuum pumps are gas-tight, 100 % oil-free, maintenance-free and quiet. Typical applications for the use of MP20 are evacuation and transfer of air, gases and vapors (e.g. Geldryers), rotary evaporation, vacuum filtration or vacuum distillation of solvents with high boiling point. |
| All pumps are provided with an adjustable vacuum gauge and manometer. For use in combination with geldryers we recommend the pump System II. The system is delivered with a separator connected to the base plate and pump inlet to prevent contamination of the pump with liquids. |
|
真空隔膜泵的選擇指南
|
| |
|
|
真空隔膜泵的技術參數
|
| |
| 泵型號 |
MP86 |
MP26/System I |
MP20/System II |
MP40/System III |
| 最大能力 |
6 l/min |
19 l/min. |
20 l/min. |
34 l/min. |
| 最終真空 |
100 mbar abs |
35 mbar abs |
8 mbar abs |
8 mbar abs |
| 最大連續壓力 |
2.4 bar |
1 bar |
1 bar |
1 bar |
| 允許室溫 |
+5℃～40℃ |
+5℃～40℃ |
+5℃～40℃ |
+5℃～40℃ |
| 允許氣體溫度 |
+5℃～40℃ |
+5℃～40℃ |
+5℃～40℃ |
+5℃～40℃ |
| 主機重量 |
1.9 kg |
5.8 kg |
3.3 kg |
12.6 kg |
| 電源供應 |
230V/50Hz |
230V/50Hz |
230V/50Hz |
230V/50Hz |
| 消耗功率 |
65W |
170W |
120W |
200W |
| Fuse Pump (2 x) T |
1.0A |
-- |
1.6A |
3.15A |
|
|
真空隔膜泵的訂貨信息
|
| |
產品編號
|
產品描述
|
| 049-000 |
Membrane vacuum pump MP86 with adjustable vacuum gauge and manometer, end vacuum 100 mbar, max. delivery 6 l/min, 230 V, 50 Hz |
| 049-100 |
Membrane vacuum pump MP26 with adjustable vacuum gauge, manometer and
1 m vacuum tubing, end vacuum 35 mbar, max. delivery 19 l/min, 230 V, 50 Hz |
| 049-300 |
Membrane vacuum pump MP20 with adjustable vacuum gauge, manometer and
1 m vacuum tubing, end vacuum 8 mbar, max. delivery 20 l/min, 230 V, 50 Hz |
| 049-400 |
Membrane pump system II (230V, 50 Hz), incl. MP20, separator, baseplate, holder for separator and 1 m vacuum tubing |
| 049-500 |
Membrane vacuum pump MP40 with adjustable vacuum gauge, manometer and
1 m vacuum tubing, end vacuum 8 mbar, max. delivery 34 l/min, 230 V, 50 Hz |
| 049-600 |
Membrane pump system III (230V, 50 Hz), incl. MP40, separator, baseplate, holder for separator and 1 m vacuum tubing |
| |
| 049-002 |
Vacuum tubing for MP86 (2 x 1 m) |
| 049-201 |
Separator (Woulff‘s bottle) for connecting to MP26 and MP86 |
| 049-102 |
Vacuum tubing for MP26, MP20 and MP40 (2 x 1 m) |
| 049-401 |
Baseplate for MP20 |
| 049-601 |
Baseplate for MP40 |
|
|
|
