亚洲AV成人无码精品网站,被黑人猛躁10次高潮视频,日本xXXx色视频在线播放,俺也来俺也去俺也射

	相關產品鏈接
	LED/LCD/鉛珊測量
	顏色色度測量
	濁度/比濁測量
	表面反射測量
	環境/水質測量
	顏色的故事

	相關鏈接
	GC-5000L型光度計
	VSR-400型色差計
	ND-11型密度計
	NL-1型輝度計
	NDH-5000霧度計


ISO9001:2000

發光二極管/液晶顯示器/鉛珊測量儀器

LED/LCD/LeadFrame Measurement Instruments

NDH-5000型濁度儀

根據最新的ISO13468測量標準設計，且可兼容ASTM1003標準在內的常用測量標準，通過選擇新標準/舊標準的補償方法，進行不同標準的濁度測量。具有內置的光束轉換機械結構，無需移動樣品即可進行快速和準確的測定。

This model will be most appropriate for measurements of plastic, film, vinyl, or glass in the terms of haze (turbidity), total light transmittance, diffuse transmittance, parallel transmittance and Turb (turbidity mg / l) for the purpose of quality control.

應用領域：

產品特點：

	可選擇傳統的方法(JIS K 7105，JIS K 0101)和補償方法(JIS K 7361)，操作簡單
	主要用于對塑料，膠片，玻璃紙，聚乙烯，玻璃和水的質量控制測定
	內置RS-232C接口，可非常方便的與計算機連接
	彈簧樣品夾，非常利于上樣和卸樣
	“Com J”軟件(選擇件)可進行數據的采集和管理
	A white LED is used as a light source, so no lamp replacement is needed.
	A hatch type trapdoor is used at an opening, making it possible to measure total light transmittance of even a highly hazy diffusing plate with stability.
	A sample can be set either horizontally or vertically depending on its shape. A sample compartment is wide enough to accommodate a sample size from 25mm x 25mm to A4.
	You can select either a control unit (CU 1) connection type, or PC connection type.
	A measuring aperture can be chenged to 7mmΦ when using an optional attachment for taper abrasion testing.

Vertical Setting		Horizontal Setting
				Sample measurements in both horizontal setting and vertical setting are possible. A sample size of 25mm x 25mm to A4 can be accommodated into the sample compartment. Even for a sample size of larger than A4, you can measure with partial protrusion of a sample as a simplified method

NDH-2000型濁度儀技術參數

測量項目	混濁度(濁度)，總透光率，散射光透光率，平行光透光率，Turb
測量范圍	濁度(混濁度)：0~100 總透光率：0~100 散射光透光率：0~100 平行光透光率：0~100 Turb：0~500 (通過校正曲線可設置到9999.99)
測量方法	積分球光電光電法光度測定法
照明/接收	0º- d方法
適合標準	JIS K 7361，JIS K 7105，JIS K 0101，ISO 13468，ASTM D 1003
準確度(重現性)	總透光率：0.05%，相對滿刻度(100%)
外形尺寸	寬度400mm，深度400mm，高度190mm
重　　量	12公斤
電　　源	AC電源
功　　率	100W
光　　源	鹵素?zé)簦?V/2A
選擇件

注：此型號的準確度來自于日本顏色研究所(JCRI)的國家標準

Dimensions	W 334mm x D 294mm x H 473mm
Light source	Si photo-diode with V filter
Measuring items	Total light transmittance, Haze, Diffuse transmittance, Parallel transmittance, Turb
Measuring luminos flux	14mmΦ incident light opening : 25mmΦ
Measuring area	Luminoflux : 12mmΦ Incident light opening : 25mmΦ
Measuring method	Double beam system using an integrating sphere with compensatory opening
Related standards	JIS K 7361 (ISO 13468), JIS K 7136 (ISO 14782), JIS K 7105, ASTM D 1003
Measurement accuracy	• Standard deviation within 0.03% where 20 minutes later after turning on the power, 20 times of measurements are made at 23ºC in airspace, and repeatability is checked.
Interface	Connection via Serial port (D-sub 9pin male)
Option	• Attachment for taper abrasion testing